Customization: | Available |
---|---|
Output Type: | Single |
Warranty: | 2 Years |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
INPUT DETALIS
110V/220V AC± 20% Selected by switch
Our company is switching power supply factory
We are specialized in making switching power supplies.So if you want
These models or any other kinds of power supply models, we can make them for you.
*With CE certificate, so you can trust our quality and servece.And theprice is competitive.
SPECIFICATION
1.Low price and high reliability
2.105 output capacitor
3.AC input power suitable for the world
4.High efficiency and low operation temperature
5.Soft-start current can reduce the AC input impact effectively
6.With short-circuit and overload protection
7.Compact size, light weight
8.100% full-load burning test
9.Installed with EMI filter, minimum wave
MODEL |
SCN-1000-12 |
SCN-1000-24 |
SCN-1000-36 |
SCN-1000-48 |
DC VOLTAGE |
12V |
24V |
36V |
48V |
CURRENT RANGE |
0 ~ 80A |
0 ~ 42A |
0 ~ 28A |
0 ~ 21A |
EFFICIENCY |
80% |
85% |
86% |
87% |
WAVE & NOISE |
150mVp-p |
150mVp-p |
150mVp-p |
150mVp-p |
ADJUSTABLE RANGE FOR DC VO;LTAGE | ±10% |
±10% |
±10% |
±10% |
LINE REGULATION |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
LOAD REGULATION |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
SETUP, RISE HOLD UP TIME |
2000ms, 50ms,20ms/230VAC at full load |
|||
VOLTAGE RANGE |
90~132VAC/180-264VAC by switch 254~ 370VDC |
|||
FREQUENCY RANGE |
47 ~ 63Hz |
|||
IMPACT CURRENT |
Cold start current 45A/230VAC |
|||
WORKING TEMP. |
-10 ~ +50ºC |
|||
OVERLOAD PROTECTION |
105%-135% cut off the output , automatic recovery |
|||
OVER VOLTAGE PROTECTION |
115%-140% shunt down O/P voltage,re-power on to recover |
|||
WITHSTAND VOLTAGE |
I/P-O/P:1.5KV I/P-FG:1.5KV O/P-FG:0.5KV 1minute |
|||
ISOLATION RESISTANCE |
I/P-O/P, I/P-FG, O/P-FG:500VDC/100M Ohms |
|||
DIMENSION |
291*132*68mm (L*W*H) |
|||
WERIGHT |
2.65kg |
|||
PACKING |
37.5*31*25.5cm/6pcs/16kg |
|||
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25oCof ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 0% to 100% rated load. 6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meetsEMC directives. |
1.Prompt reply:Any inquiry or questions would be replied within 24 hours. |
2.Quality Product:Manufacture company, each of the products is tested and calibrated. |
3.Hospitality:Offer smiling service and your visiting is highly welcomed |
4.Fast delivery:Delivery time is within 3-7 days usually, other occasion depends on the order qty. |