| Customization: | Available |
|---|---|
| Application: | Three Phase Transducer |
| Output Type: | Triple |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
5.5kw - 55kw intelligent 3 Phase Motor Soft Starter with bypass contactor 220V
The WSTRM softstarter is the most compact of all the softstarter ranges which allows for design of compact starting equipment. A WSTRM built-in bypass contactor, the energy losses inside the softstarter are highly reduced.
| Secure motor | Reduce the electrical stresses and keep the motor protected with the MMS |
| Reliability | The WSTRM reduces the starting current for the motor. The possibility to connect it to the manual motor starter makes it possible to build a compact and complete starting solution with overload and short-circuit protection |
| Improve installation | Saving time and money with built-in bypass and easy setup |
| Efficiency | On the WSTRM, the bypass is built in, saving you time during installation and space in your panel. Set-up is done through three potentiometers making it very fast and easy. |
| Increase application | Reduce the mechanical stresses on your motor |
| Productivity | Soft start and stop with PSR will reduce mechanical wear and tear on the application and increase the availability and uptime. |
Product conditions
|
Input voltage |
AC380V(-15%~+15%),50Hz |
|
Applicable motor |
Squirrel-cage asynchronous motor (please specify when ordering winding motor); |
|
Starting frequency |
Standard products are recommended to start and stop no more than 6 times per hour; |
|
Cooling mode |
Natural air cooling; |
|
Installation |
Wall-mounted; |
|
Protection level |
IP20 |
|
Environmental conditions |
Altitude,<2000 m, or>2000 m, corresponding reduced capacity use; The environment temperature at 25 ºC ~ + 40 ºC. Relative humidity is not more than 95% (20 ºC + / - 5 ºC) without any condensation; No flammable, explosive, corrosive gas, no conductive dust. Indoor installation, good ventilation.Vibration less than 0.5G. |
Product Power meterl
|
Model |
230V/kW |
400V/kW |
500V/kW |
Rated current |
|
5R5 |
3 |
5.5 |
5.5 |
13 |
|
7R5 |
4 |
7.5 |
7.5 |
17 |
|
11 |
5.5 |
11 |
11 |
25 |
|
15 |
7.5 |
15 |
15 |
32 |
|
18 |
7.5 |
18.5 |
22 |
37 |
|
22 |
11 |
22 |
30 |
45 |
|
30 |
15 |
30 |
37 |
60 |
|
37 |
18.5 |
37 |
45 |
75 |
|
45 |
22 |
45 |
55 |
90 |
|
55 |
30 |
55 |
90 |
110 |
){kind=link}