| Output Type: | Single |
|---|---|
| Warranty: | 2 Years |
| Output Power: | 30W 45W 60W 75W 120W 240W 480W |
| Samples: |
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier 
MODEL |
DR-30-5 |
DR-30-12 |
DR-30-15 |
DR-30-24 |
|
OUTPUT |
DC VOLTAGE |
5V |
12V |
15V |
24V |
RATED CURRENT |
3A |
2A |
2A |
1.5A |
|
CURRENT RANGE |
0-3A |
0-2A |
0-2A |
0-1.5A |
|
RATED POWER |
15W |
24W |
30W |
36W |
|
RIPPLE & NOISE (max.) Note.2 |
80mVp-p |
120mVp-p |
120mVp-p |
150mVp-p |
|
VOLTAGE ADJ. RANGE |
4.75-5.5V |
10.8-13.2V |
13.5-16.5V |
21.6-26.4V |
|
VOLTAGE TOLERANCE Note.3 |
±2.0% |
±1.0% |
±1.0% |
±1.0% |
|
LINE REGULATION |
±1.0% |
±1.0% |
±1.0% |
±1.0% |
|
LOAD REGULATION |
±1.0% |
±1.0% |
±1.0% |
±1.0% |
|
SETUP, RISE TIME |
800ms, 60ms,50ms/230VAC at full load |
||||
HOLD UP TIME (Typ.) |
100ms/230VAC 21 ms/115VAC at full load |
||||
INPUT |
VOLTAGE RANGE |
85 ~ 264VAC 120-370VDC |
|||
FREQUENCY RANGE |
47 ~ 63Hz |
||||
EFFICIENCY (Typ.) |
74% |
81% |
82% |
83% |
|
AC CURRENT (Typ.) |
0.88A/115VAC 0.48A/230VAC |
||||
INRUSH CURRENT (Typ.) |
COLD START 15A/115VAC,30A/230VAC |
||||
PROTECTION |
OVERLOAD |
105 -160% rated output power |
|||
Protection type: Constant current limiting, recovers automatically after fault condition is removed |
|||||
OVERVOLTAGE |
5.75-6.75V |
13.8-16.2V |
17.25-20.25V |
27.6 -32.4V |
|
Protection type: Shut down o/p voltage, re-power on to recover |
|||||
ENVIRONMENT |
WORKING TEMP. |
-10ºC ~ +50ºC (Refer to "Derating Curve") |
|||
WORKING HUMIDITY |
20 - 90% RH non-condensing |
||||
STORAGE TEMP., HUMIDITY |
-40 ~ +85"C, 10 ~ 95% RH |
||||
TEMP. COEFFICIENT |
±0.03%/"C (0 ~ 50'C) |
||||
VIBRATION |
10 ~ 500Hz, 2G 10min./1 cycle, period for60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6 |
||||
SAFETY & EMC (Note 4) |
SAFETY STANDARDS |
Design refer to EN50178 |
|||
WITHSTAND VOLTAGE |
l/P-0/P:1.5KVAC l/P-FG:1.5KVAC 0/P-FG:0.5KVAC |
||||
ISOLATION RESISTANCE |
l/P-0/P:100M Ohms / 500VDC / 25'C/ 70% RH |
||||
EMC EMISSION |
Compliance to EN55011, EN55022 (CISPR22) Class B, EN61000-3-2,-3 |
||||
EMC IMMUNITY |
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2, EN61204-3, heavy industry level, criteria A |
||||
OTHERS |
MTBF |
441,5K hrs min. MIL-HDBK-217F (25'C) |
|||
DIMENSION |
78*93*56mm (W*H*D) |
||||
PACKING |
0.27Kg; 45pcs/14Kg/1.02CUFT |
||||
NOTE |
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 "c of ambient temperature. 2.Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. 3.Tolerance : includes set up tolerance, line regulation and load regulation. 4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. |
||||
Why choose us?
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}